We are aware that users are reporting issues with the Steam® version of METAL GEAR SOLID: MASTER COLLECTION Vol.1 resulting in the game running at abnormal speeds.
We ask for your patience while we conduct a thorough investigation.
We recommend that you try the following workaround as a temporary solution.
This workaround is not necessary if you are not experiencing these issues.
Instructions
For those using a graphics card made by NVIDIA®
We recommend that you follow these steps below.
The screen configuration, etc. may be different depending on the which version you have installed.
- Open the “NVIDIA Control Panel”, then select the “Manage 3D settings” located on the left-side of the window.
- Select the “Program Settings” tab.
- In the “1. Select a program to customize:” section click on the “Add” button, then go to the folder where you have “METAL GEAR SOLID - Master Collection Version” installed and select “METAL GEAR SOLID.exe”.
Once selected, make sure that the file location is displayed on the right-side of the “Add” button.
- In the “2. Specify the settings for this program:” section, make sure that the “Vertical sync” is turned on.
- In the “2. Specify the settings for this program:” section, make sure that the “Max Frame Rate” is at 60FPS.
- Click the “Apply” button.
For those using a graphics card made by AMD
- Launch the “AMD Software” that you have installed.
- In the “Gaming” tab, select “METAL GEAR SOLID - Master Collection Version”.
- Make sure that the “Radeon™ Chill” is turned on, with the Min FPS and Max FPS set to 60.
- Make sure that the “Wait for Vertical Refresh” is set to Always on.
