Developer posts and news about this game.
Testing a tune or new firmware means a lot of hovering and circling over an empty field. To keep you from getting bored, this update brings the field to life. Ruins to explore A destroyed city and an abandoned house now stand in the field. Weave between the ruins, slip through br
SITL Forge started on 5 kg+ heavy lifters. It goes small now. What's new First 2" micro. Mirro20 frame, 1103 11000KV, 2023 tri-blades, 2S 550 mAh — 70 g all-up, 5.1:1 thrust-to-weight, around 9 minutes. Rotational inertia is computed from your actual build. Every airframe used to
This build pushes the workbench into proper X-class territory: two new 5215 motors, a 12S pack to feed them, and the frame mounts to bolt them on. New motors — 5215 X-Class Both are modelled from real manufacturer bench data, not estimates. Same 52×15 stator and 344.5 g weight —
Fly with the keyboard — no controller needed You no longer need a gamepad or radio to get in the air. When no game controller is connected, SITL Forge maps the flight sticks onto the keyboard: Arrow keys — roll and pitch Q / E — yaw (turn left / right) Shift / Ctrl — throttle up
This update adds a new, much lower-latency way to connect SITL Forge to **iNAV SITL**, plus real-time physics improvements that benefit every flight mode. ## ✨ New: iNAV RealFlight transport (recommended) SITL Forge now speaks iNAV's native **RealFlight** interface (`--sim=rf`).
The Betaflight and iNAV setup guides — the ones behind the Setup help link on each External FC card — were English-only, and stayed English even after you switched the app language. Both are now fully translated into Ukrainian and Simplified Chinese. They follow the app language.
Betaflight changed the order of the motor values its SITL sends on the wire in April 2026. If you built your SITL from recent Betaflight source, the simulator was reading each motor's command one position off — the quad flipped the instant it left the ground. SITL Forge now asks
You can now point SITL Forge at a SITL running somewhere other than your own PC — inside WSL on Windows, or on another computer on your network. What's new Network settings per flight controller. Open the External FC menu and click Network on any integration card to set the SITL
For the people who have a joystick without buttons, we have added hotkeys to switch ARM (A key) and Flight modes (M key). It works only if you didn't assigned this channels before.
The parts library got a big upgrade. NEW MOTORS — 9 Light/Mid/Heavy Generics covering 7", 10" and 13" frames. Includes a 4720-class 300KV on 12S for the heavy 13" lifters. REBALANCED — every motor in the catalog was rebalanced through a physics-based scaler. No more outliers (the