
My second helicopter Bell-Hiller system Pre-flight preparation checklist: Set physics simulation parameters: Update rate = 400; Constraint Accuracy = 5,00; Contact Detection OFF, Consumption OFF (Check fig.5). Turn on Tjackjesus' Aerodynamics, disengage al
9,872 Steam results · Checked
911 Carrera RS IL - 1:02.914
This is the MMX in GearBlocks! It only took a couple of months to build, so that's nice :.( IMPORTANT: Make sure the machine's legs are as level as possible for the machine to work. Instructions: press T, then R, and wait for the marbles to fill up the top
This script allows you to control any engines throttle with a lever, manually, so you can finally throttle up half-way or gradually! Great for maybe trains, testing engines, or maybe attach a servo/ actuator and finally be able to cruise with a car with le
1985 Civic disenagage current gear when shifting.
This engine features a turbo intake and is also a hybrid, using an electric motor provides roughly a 2-3% power increase. Connected to the engine is a 3 Speed forward gear Automatic transmission, this transmission is good for light vehicle models meant for
PLEASE READ: this transmission requires you to turn up your physics to use, it will slip badly unless you turn constraint accuracy up you will also likely need script mods on to allow you to connect things to the input axle Controls: Shift - Upshift Ctrl -
a new version of "basic plane 3" use Aero mod
1970s body style with a 8v71 detroit and a manual 18 speed dual range transmission (MS-18D) operation: -park brake and trailer brake must be released each time you get in as it sets each time you exit the vehicle -Tranmission uses arrow keys to manually mo
Lock axle: i Creator: Unslinga
Important! 1. To control the hydraulics, you need to turn on the pump distributor gearbox (E-Motor). 2. To turn on the E-Motor, you need to turn on the ignition.