Author: a_ra_ga_l Purpose: A UI for sizing parts to custom dimensions. Application: Can be used to achieve more subtle shapes of creation. Usage: 1. Target part that you want to edit (no need to select the part) * Make sure that part is not attached 2. Cha
9,873 Steam results · Checked
Author: Steintie Requires Aerodynamics mod to work I tried to create a realistic WWII Fighter Plane to the best of my ability and this is the result! All the control surfaces are controlled from the steering wheel in the cockpit which also moves like it wo
Idea for a continuously variable transmission (CVT). Use the grabber tool to move the lever. By <color=orange>dangersam</color>, the GearBlocks dev.
Take a go-kart on some timed laps around a custom track layout. <i>Load via the <b>BEGIN SCENARIO</b> screen to play this scenario.</i> By <color=orange>dangersam</color>, the GearBlocks dev.
Inspired by: beeth-oven's creation To work requires: Aerodinamics custom sript
This Chassis is my first build. It has Locking front and rear Differentials. Toggleable 4WD. Adjustable ride Height. Next to come is a compact Transmition.
Time your build, or just waste some time! It's a working supposedly accurate analog clock what else is there to do now with escapement mechanism cuckoo now has an audio with it
May have to adjust values. This was based on a 1000 rpm max.
Racing variant of my ride on mower Track ready beast 146 km/h top speed Stable and smooth handling
My second helicopter Bell-Hiller system Pre-flight preparation checklist: Set physics simulation parameters: Update rate = 400; Constraint Accuracy = 5,00; Contact Detection OFF, Consumption OFF (Check fig.5). Turn on Tjackjesus' Aerodynamics, disengage al
Compact 5 speed transmission with 4 forward and 1 reverse gear. Fits in a 4x7x9 box, the green colored blocks and pulleys are for attaching in/outputs but you can also just extend the axles which are attached to the gray chassis if you dont want to use pul