IT THINKS! has been out for two days, and you have sent us more useful feedback in those two days than we could have hoped for: reviews, Discord threads, emails, logs and screenshots. Some of it was hard to read, and almost all of it was right. This update is built from it.
Build your own parts, properly
The game is about abstraction, and it was too hard to abstract your own work. That changes today.
- Cast a Chip on any selection. Select the parts you want and cast them. Every wire that leaves the selection and every unconnected input or output becomes a pin of the new chip. The dialog shows the pins before you cast. No more borrowing or copying the contract's input and output boxes.
- Adjustable Split and Join. Select a Split or Join you placed and type its slice widths, for example 2,2 or 4,4,8. The fixed sizes stay on the shelf as shortcuts.
- Split and Join for every width. The shelf now offers a Split and a Join for every bus width any chip on it uses. Nineteen contracts gained Split 2 and Join 2. RAM 16x8 could not use the DEC2-4 its own brief asked for, and the register file in CORE and WARP could not be wired as intended. Both are fixed.
- Your own chips are yours to manage. Rename and remove them from the desk. Cast a Chip suggests a sensible name and no longer takes the name of a contract's chip.
Tip: inputs fed from the same wire share one pin. Wire all the select inputs of a bus-wide multiplexer to one source before casting, and you get a single select pin.
Clearer names, fairer tests
- Pin names. Several pins carried letters from the game's original Turkish text. They now use the usual names: s, c and cin on the adders, and op, acc, mem, imm, diff, neg, dest and inst further on. Your saves and builds are untouched.
- REG1 and REG4. The test no longer expects a value before the first write. A register that is correct but built from latches now passes, and if such a register later leaves a counter without a starting value, the failure message says why.
- RAM and ALU4. The briefs and hints now point you at casting a bus-wide selector instead of wiring a hundred single multiplexers.
Stability and graphics
- If the graphics driver drops the game's device, the game rebuilds its renderer and carries on instead of closing. If it does have to close, your draft and save are written first.
- New launch options for machines with graphics trouble: --backend dx12 (or vulkan), and --gpu followed by part of the name of the graphics card to use. In Steam: right-click the game, Properties, Launch Options.
- A crash at startup on Windows now leaves a crash record in the game's log folder.
- The Settings screen and the log show which build you are running.
Smaller fixes
- The "Your parts" row on the desk can be dragged to scroll.
- The open device panel on the desk scrolls when it does not fit the window.
- The free bench workshop explains what a new chip needs before it can be cast.
- Demo saves now carry over to the full game through Steam Cloud.
Coming next
- Copy and paste that survives opening another contract, so you can carry a build from one bench to the next.
- More addresses in the RAM test, and a factory test message that tells you which inputs failed instead of a tick number.
- A search box on the parts shelf, with NAND count and delay shown for your chips.
- Names for the pins of your own chips.
Thank you
If something breaks, the fastest way to help is the game.log from the game's log folder, posted in the Steam discussions or on Discord. If you wrote a review while these problems were there, we would be grateful if you gave the game another look.
