CAST A CHIP ON ANY SELECTION
Select the parts you want and press Cast a Chip. The open ends of the selection become the chip's pins: every wire that leaves the selection and every unconnected input or output. The dialog shows the pins before you cast. You no longer need to borrow or copy the contract's input and output boxes.
Tip: inputs fed from the same wire share one pin. Wire all the select inputs of a bus-wide multiplexer to one source before casting and you get one select pin.
The new pins get neutral names for now (in1, in2, out1). Naming them yourself is coming.
ADJUSTABLE SPLIT AND JOIN
Select a Split or Join you placed and type its slice widths, for example 2,2 or 4,4,8. The fixed sizes stay on the shelf as shortcuts.
SPLIT AND JOIN FOR EVERY WIDTH (earlier today)
The shelf offers a Split and a Join for every bus width any chip on it uses. Nineteen contracts gained Split 2 and Join 2, among them RAM, the instruction decoder, CORE and WARP.
ALSO
- The RAM and ALU4 hints now describe the new way to cast a selector.
- The Settings screen and the log show which build you are running.
COMING NEXT
- Copy and paste that survives opening another contract.
- A search box on the parts shelf, with NAND count and delay shown for your chips.
- Names for the pins of your own chips.
