From the Depths v4.3.8 - more additions and fixes
More for v4.3.8. The CRAM fusing box has a 'Distance from target' fuse and cluster shells, and the shotgun barrel gets 'Projectile speed variation'.
Walkers are easier to set up, with a 'Walk cycle' tab on the gait driver.
The decorations editor has undo and redo, and the build mirror now copies each change as you make it.
The saga with glass continues.
Additions
- CRAM shotgun barrel - New 'Projectile speed variation', as bomb chutes have: the projectiles arrive one after another instead of all at once, each still in its own place in the spread.
- CRAM fusing box - New 'Distance from target' fuse: the shell goes off a set distance short of what the cannon is aimed at.
- CRAM fusing box - New 'Cluster shell' option: the shell splits into smaller shells when its distance, timed or altitude fuse goes off. Set how many and the spread on the fusing box. Works with shotgun barrels and bomb chutes too.
- Building - Mouse based building can now build with right click and remove with left click. Choose it in Options > Building.
- STL files - The STL file creator on the General info tab of Construct information has two new options. 'Solid inside' fills the inside of the vehicle, and 'Detailed blocks as boxes' writes blocks such as laser pumps as plain boxes. Both make smaller files that are easier to 3D print.
- APS - A Duplicate button on each shell in the shell sequence editor adds the same shell again straight after it.
- Decorations - Undo and redo now work in the decorations editor: Delete all, deleting, moving, scaling and every other change, one step for each click or drag. The keys also work with the editor open. In multiplayer they cover the host's changes.
- Walkers - The gait driver has a new 'Walk cycle' tab. It plays every leg going round its walk cycle, seen from the side, from behind or from above, for walking forward, reversing, turning and sidestepping. Red marks where a joint's angle limit or the leg's reach stops it.
- Walkers - The 'Walk cycle' tab can also set the gait, and the step height, stand height, stride and how far apart the feet stand for every leg at once.
- Walkers - New 'Set up, keeping my settings' button on the gait driver and on a joint's Gait tab. It leaves the angle limits you have changed alone, keeps each leg's stand height, step height, knee direction, spread and foot offset, and shortens the stride to fit.
- Walkers - New 'Stand tall when stopped' on the gait driver: the legs straighten when the walker stops and bend again as it sets off.
Changes
- Decorations - With the build mirror on, the decorations editor now copies every change to the other side as you make it. The 'Apply with mirror' button is gone.
- Walkers - 'Add legs' now builds each thigh and shin as one straight row of blocks, and the joints' angles give the leg its shape.
- Walkers - Legs on a ball joint hip mounted on the side of the hull can now sidestep. Only spin block hips cannot.
- Walkers - Much larger legs can be set up: 'Hip to knee' and 'Knee to foot' up to 100m, 'Stand height' and 'Ride height' up to 200m, 'Stride' up to 150m and 'Step height' up to 50m.
- Walkers - 'Set the whole machine up to walk' now gives a leg that stands taller than 7.5m a higher step, a fifth of how tall it stands. Every leg was held to 1.5m.
- AI - Every AI distance setting now goes up to 5000m, such as attack run, ram, wander, idle and yaw lock distances, the turning circle, and the broadside minimum and cease movement ranges. Altitudes go from -500m to 5000m, and heights above the target from -5000m to 5000m. Saved settings are unchanged.
- Ball joint - The 'Swivel control' and 'Tilt control' tabs now say when the walk cycle is turning that axis, so the angle set there is not used.
Fixes
- Glass - See-through glass shows in front of blocks again, and painted glass fades smoothly to solid.
- APS - 'Assign shells to intakes' no longer runs off the right of its window. The Remove buttons and the 'Shell sequences' tab were cut off.
- Building - The mouse button hint in mouse based building no longer shows add and remove the wrong way round.
- AI: Circle - 'Minimum approach angle' and 'Maximum retreat angle' now only set limits. Changing them no longer changes the angle the vehicle holds while it is inside them.
- AI: Circle - Fast vehicles now head straight for their combat distance and turn onto the circle as they arrive, instead of creeping in at a wide angle and stopping short.
- STL files - STL files no longer hold the main hull twice.
- Saving - The rows of the vehicle loader and other file lists no longer spread apart after a window with a graph has been opened.
- Watch the AI - Loading a saved game no longer brings back council meetings. The AI factions stay at war with each other.
- Campaign - AI fleets no longer wait for ever beside another faction's fortress or vehicle that is queued for building with nothing built yet. They now destroy it, unless one of its owner's fleets is there to defend it.
- Campaign - Staying too close to another faction's resource zone now starts the war once the countdown ends. Before the first council meeting the countdown just started again.
- Terrain - Terrain now keeps loading while the game is paused, when you move the camera far from your vehicles.
- Sea - Apple Macs. A dark or white rectangle no longer covers the sea under the camera when looking straight down far out on the map, such as in fleet control.
- AI: Skirmish - The Skirmish window now has its 'Combat distance' slider. It was missing, so Skirmish always used 1000m.
- Decorations - Redo now brings back a decoration placed from the build menu with the changes made to it afterwards.
- AI control (C) - A behaviour's tooltip now shows that vehicle's own name for it. With two vehicles from the same design it showed the name from the one lower in the list.
