Hi Everyone, We have another technical update for you ahead of our games upcoming launch.
How does power work?
All power throughout the ship is measured in Mega Joules per Second or MJ/S.
There are two ways to generate power for your ship.
Main Power:

The main power supply for your ship is provided by the Quantum Conduit Module or QCM for short. The module doesn’t generate any power itself, but is able to instantaneously transfer significant amounts of power directly from the fusion drive that is located on the primary mining station.
The amount of power the QCM can transfer depends on the stability of the Quantum Synchronization state or QS state for short, which can be configured using the X,Y,Z and W input axis. To achieve a QS state you must configure each axis to receive a specific signal using Quantum Channel Generators and Mathematics modules. There are multiple QS states theoretically possible ranging from 1% of the fusion drives total output all the way up to 100%.
Once each axis is receiving the correct signal for that QS state then the total power throughput will automatically adjust to the maximum the QS state will allow. Without any signals plugged into any of the axis a trickle of power will go through the QCM to maintain the connection to the main fusion drive on the primary mining station. Circuit diagrams for various QS states are in the game and can be earned as you progress.
If you try to pull more power than is available to the conduit then the link and power throughput becomes highly unstable, if this instability is maintained for too long the link will become desynchronised with the station and a manual restart will be required.
Emergency Power:

There is an emergency Dynamo located within your DataPad to be used if…when…main power fails. You can plug modules directly into the back of your personal data pad and shake the pad to get a small amount of power. There is enough charge to power doors or lights but not much else.
Routing Power:

You can supply power to most modules within a room using the small 1 MJ/S power cables.

Use the large 50 MJ/S power cables to transfer power between rooms and to power hungry modules such as the thrusters, linear/angular dampers and the CO2->O2 production module.

There are also Energy Cells and other Power Distribution modules that can aid in keeping your ship powered and routing power where it is needed, for when it is needed.
We hope that this has… sparked… your interest and will… power… your thoughts on what to do when you get into our game.
Until Next time future haulers!
I Fetch Rocks Team
