The current update contains some bug fixes, but also important changes for the correct functioning of vehicle functions for the depot DLC.
Changelog:
- The shunting console has been implemented on all three trams (on the E2 currently only in the c5 trailer) and can be used with activated depot DLC. Control either by mouse or by keyboard (default key assignment: Q: speed step higher, Y: speed step lower, X: detent B2 (= hazard braking), Num 5: release brake).
- Switches in the Knöllgasse to the depot can now be operated (via ITCS/IBIS or manually using the switch operation rod) with activated depot DLC
- ULF and Flexity now have dynamic dirt on the outside of the vehicle and can be washed in the washing facility at the depot with activated depot DLC. Dynamic dirt for E2 and trailer will be added later
- Added switch faults and signal faults (with adjustable frequency level in the main menu) that occur randomly when the depot DLC is activated
- Destinations for trips from the depot to Stefan-Fadinger-Platz and Prater as well as destinations for trips from Stefan-Fadinger-Platz and Prater to the depot are now selectable in ITCS/IBIS
- All trams: the ITCS/IBIS now switches correctly to the return route for a short trip to Karlsplatz
- For Flexity and ULF it is now possible to drive on "VB" (depot drive), or if the shunting console has been activated, with first and last door open. Also the first door can now be opened on "VB" (depot drive) and the last door can be opened during shunting.
- For E2 and the c5 trailer, the first and last door can now be opened by means of a key switch on the outside (click on the cover)
- Flexity: the speed preselection now decelerates the train if you get too fast due to a gradient and exceed the set speed (provided you do not brake yourself)
- ULF and Flexity: sounds for cockpit door added
- Interaction range with switches (for using the switch operation rod) increased
- Markers for stops and interactions at the depot and in scenarios can now be turned off separately in the HUD settings
- All texts and images of the interactive help can now be found via the tutorial menu under "General Help"
- Bugfix: USTRAB signals at track crossings showed a wrong direction of travel (arrow)
- Bugfix: sometimes a level-up was displayed too early, although the necessary points were not reached yet
- Bugfix: the "Confirm" button at the timetable selection did not work initially (only when another trip was selected)
- Bugfix: in the Tram Challenge "Door stop" the texture for the arrow at the second door was not displayed correctly
- Added tolerance for joystick control on Flexity and ULF, so that no fault message is shown on the display when the depart prevention is active (e.g. doors open) and the joystick is minimally moved
- Bugfix: ULF driver's cab light did not work after shutdown and start-up again
- Bugfix E2 and ULF: Passengers wanted to board when stopping at stops after starting-up without entering a destination (and thus with destination display "Sonderzug")
- ULF: After start-up, driving off is now only possible if the ZSG (message display) is initialized completely
- ULF: Automatic passenger light (with passenger light switch position "0") added
- ULF: Door 1 can no longer be operated by door button in cockpit when vehicle is shut down
- Bugfix: pressing "Esc" paused the game during the loading screen
- Bugfix: VR mode can now no longer be activated when in first person perspective (= not sitting in the cockpit)
We wish you lots of fun with this update and the new depot DLC!
Your TramSim-Team