This update re-introduces the MFD SENSOR page. Also, the old VMS trace/tracking and localizer indicators have been removed, and are now properly projected on the VMS. The MFD sensor display is now in 3D isometric view, rather than the old top/front displays.
Not only this, the trace and track icons have gotten a slight makeover. Not yet final, but a bit more refined than they were.
I've begun the process of linking COMMS to the targeting system. For now,
when the VMS is in "TRACKING" display mode, you will see an indicator for each signal you have dialed in to COMMS. You will also notice indications of which signal is on the currently selected COMMS channel, which is being used as the active localizer and audio.
To go along with the above, a VERY preliminary target intercept mode has been added to NAS. To use it, you have to have a target selected, be outside of 10 km, and a closure of greater than 20 ms is recommended (although not required). While I've tested it at greater than 4000 km, it is really only meant for ranges between 50 and 1000 km. All this said, it should make it MUCH easier to rendezvous with distant targets, such as the target ring that needs rescuing in single mission 1.
Please note that this is very rough, and is prone to pointing the ship in the wrong direction when the relative velocity vector is VERY off-angle AND the closure is very close to 0 ms.
Please see the current change log, here:
http://steamcommunity.com/app/366000/discussions/0/364041776190769973/